- Prices
- Features
- Colors
- Specs
- Care Guidelines
Standard Sizes (Sizes are approximate)
Sizes | Price 1 |
Price 2 - 10 | Price 11 - 25 | Price 26+ |
---|---|---|---|---|
2' x 3' | $72.87 | $71.56 | $69.59 | $67.94 |
3' x 4' | $102.82 | $100.30 | $96.53 | $93.40 |
3' x 5' | $116.69 | $113.62 | $109.02 | $105.19 |
3' x 8.4' | $185.04 | $179.25 | $170.54 | $163.29 |
3' x 10' | $193.36 | $187.22 | $178.02 | $170.36 |
3' x 12.2' | $253.19 | $244.66 | $231.87 | $221.21 |
3' x 16' | $324.25 | $312.88 | $295.82 | $281.61 |
3' x 20' | $395.31 | $381.09 | $359.78 | $342.01 |
4' x 6' | $162.69 | $157.78 | $150.42 | $144.29 |
4' x 8.4' | $229.55 | $221.97 | $210.59 | $201.11 |
4' x 10' | $244.48 | $236.31 | $224.04 | $213.81 |
4' x 12.2' | $324.26 | $312.89 | $295.83 | $281.62 |
4' x 16' | $419.00 | $403.84 | $381.10 | $361.65 |
4' x 20' | $513.76 | $494.81 | $466.38 | $442.69 |
6' x 8.4' | $332.70 | $320.99 | $303.42 | $288.80 |
6' x 12.2' | $479.34 | $461.76 | $435.40 | $413.44 |
6' x 16' | $608.49 | $585.76 | $551.64 | $523.22 |
6' x 20' | $750.62 | $722.19 | $679.55 | $644.03 |
- National Floor Safety Institute (NFSI)-certified SLIP-RESISTANT floor mat; NFSI clinical tests show WATERHOG DIAMOND meets highest performance standards
- Proudly Made in the USA
- 100% 24 oz./yd. solution-dyed polypropylene fiber system surface, dries quickly and will not fade or rot, with outstanding light fastness
- SBR rubber backing with 20% recycled content
- Rubber backing is available in Smooth backing for hard surface floors or Gripper backing for carpeted floors
- Unique "Water Dam" and ridge construction removes and holds dirt and moisture effectively
- Exclusive rubber-reinforced face numbs protect the surface pile from crushing, prolonging the mat's life and performance
- Available with contrasting Black rubber borders or with matching colored fabric borders
- Recommended for any commercial building, hotels, restaurants, healthcare facilities, office buildings, schools, universities and more
- Fiber Type: Solution-dyed Polypropylene
- Weight: 24 oz. per square yard
- Nub Height: 1/4"
- Backing Type: SBR rubber (20% recycled content)
- Nub Thickness: 0.190"
- Between Nubs Thickness: 0.050"
- Border Thickness: 0.110"
- Durometer: 60
- Tensil: 1400 PSI
VACUUM DAILY
When possible, Waterhog mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.
ROUTINE MAINTENANCE
Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner. In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service. Periodically as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer or a water hose. Following the use of this method, the mats should be placed in a position to allow them to drain. The draining will occur rapidly and the mats will be ready to put back into service in a short time.
DEEP CLEANING
Waterhog mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible.
FLOOR PREPARATION
Prior to the mat being put back into service, it is recommended that the floor where the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.